![]() ![]() ![]() It is most often used to connect two devices of the same type, e.g. Patch Cable vs.Cable wired to allow two similar devices to be directly connectedĪn Ethernet crossover cable is a crossover cable for Ethernet used to connect computing devices together directly. While the former one connects two different types of devices to each other such as “a computer to a switch” and the latter one connects two devices of the same type to each other such as “one computer to another computer”. Both Ethernet cable and crossover cable abide by T568A and T568B wiring standards with 8 different color pins on each side of the connector. In short, the similarity of crossover cable vs Ethernet cable comparison is obvious. The following shows the crossover cable wiring diagram: One end uses the T568A wiring standard, and the other end uses the T568B wiring standard. A router’s LAN port to a switch/hub’s normal portĭifferent from the straight-through Ethernet cable, crossover network cable uses two different wiring standards on both ends (connector A and connector B).One hub to another hub connecting a normal port on both sides.One switch to another switch connecting a normal port on both sides.is a type of twisted pair cable used to connect two devices of the same type such as “DTE to DTE” or ”DCE to DCE” in the following situations: That is, both ends (connector A and connector B) use T568A wiring standard or both ends use T568B wiring standard with the same color.Ĭrossover Cable vs Ethernet Cable: What Is A Crossover Cable?Ĭrossover cable such as Cat5, Cat5e crossover cable, etc. Straight through cable uses the same wiring standard on both ends. While, in T568B wiring standard, there are two color order exchanges compared with T568A, pin 1 in exchange for Pin 3 and pin 2 in exchange for Pin 6. For T568A, the color order of the 8 pins are white, green, white orange, blue, white blue, orange, white brown, and brown from pin 1 to pin 8 respectively. They differ in the order of the 8 cable colors. As we know, T568A and T568B are two standards recognized by ANSI, TIA and EIA for wiring Ethernet cables. Ethernet cable, it is inevitable to think of their wiring system. Connect 2 switches/hubs with one of them using an uplink port and the other one using normal portĪctually, when it comes to crossover cable vs.A router’s LAN port to a switch/hub’s uplink port. ![]() A router’s WAN port to a cable/DSL modem’s LAN port. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |